Lansing single rise and fall pendant. A modern adjustable pendant in nickel matt with white opaque glass shades.

The light has a fitted rise and fall mechanism, which means that the height can be infinitely adjusted as desired by using the counter weight.

It’s usually possible to adjust the height by approximately a third using the rise and fall mechanism with the light as supplied. However, it’s possible to also cut the cable at the time of installation to shorten the light further. It’s recommended that a change such as this is made by a qualified electrician and a permanent cut would void the manufacturer’s warranty.

The glass shade on this light is approximately 140mm in diameter and 100mm high.

There is no fitted switch or dimmer within this light fitting.

This light requires 1 bulb(s) of the same type:
1 x GY6.35 Capsule (Included) Max Bulb Wattage = 50W Bulb Voltage = 12V

This product requires an input voltage of 240V

This product has a built-in transformer. Transformers are used to step the input voltage, usually 240V, down to the voltage required by the bulb, usually 12V. Dimming products with transformers can result in the dimmer switch or the light itself buzzing. Using a compatible dimmer switch for the type of transformer will reduce this as much as possible. However, it is better to avoid trying to dim low voltage fittings.

Dimensions

Lighting Specification

Ceiling Lights	Wofi Lighting	Pendant Lights	Table Lamps