Dimming pull cord switch supplied with a choice of either a white plastic or chrome effect cover.

The operating voltage range of the product is 220 to 240 volts.

The maximum current capacity of the dimmer is minimum 50 watts to maximum 250 watts.

This product will operate in conjunction with good quality low voltage transformers. The maximum load capacity of the Dimpull at 12 volts is (175)250 watts. The minimum load is 50 watts.

This product is not suitable for fluorescent loads or use with wire wound transformers.

Due to the safety circuitry built into this dimmer full brightness of all types of lamps used with the dimmer will only be illuminated to approximately 80% of their optimum full brightness.

75mm diameter x 37mm deep

To turn on - pull cord downwards once and release.
To turn off at any time - pull cord downwards and release.
To dim lighting - pull cord downwards and hold until required light level is achieved, then release.
To adjust lighting level when already on - pull cord downards and hold until required adjusted level is achieved.

Bathroom Collection	Bathroom Downlights	Bathroom Ceiling Lights	Bathroom Zone 1