Astro Tosca Adjustable LED Wall Light

View larger image

Product Code: ASTROTOSCA1

This product is currently out of stock with the manufacturers, more stock is due early February 2011

Share this product with your friends


This light fitting is designed for bathrooms but can only be used outside all of the bathroom lighting zones 0, 1 and 2. This light must be at least 60cm from the vertical edge of any bath or shower tray and 60cm from any sink tap.

This light fitting has an IEC protection class of 1, single insulated.

This light has an International Protection Rating of IP20. The first digit gives this light protection against contact and ingress of objects >12.5 mm in size. The second digit show that there is no protection of the equipment inside the enclosure against the ingress of water.

This light is fitted with a switch for off and on control.

This light requires 1 bulb(s) of the same type:
1 x LED (Included) Max Bulb Wattage = 1W Bulb Voltage = 240V

This light fitting is not suitable for installation onto a dimmer controlled circuit.

This product has a built-in LED Driver. LED Drivers are required to step down the input voltage, usually 240V, low enough to operate LEDs which usually operate on about 1.5V

Product Information

Astro Lighting
If we are caught short of stock it usually takes us a week to deliver this item to you from time of receiving your order. Or to request notification of when we have stock use the product inquiry form below.


4.2 cm (approx 1.7 inches)
4.5 cm (approx 1.8 inches)
20 cm (approx 7.9 inches)

Lighting Specification

Not Dimmable
Class 1

Product Inquiry