The light source direction can be adjusted.

This light fitting is designed for bathrooms but can only be used outside all of the bathroom lighting zones 0, 1 and 2. This light must be at least 60cm from the vertical edge of any bath or shower tray and 60cm from any sink tap.

This light fitting has an IEC protection class of 3.

This light has an International Protection Rating of IP20. The first digit gives this light protection against contact and ingress of objects >12.5 mm in size. The second digit show that there is no protection of the equipment inside the enclosure against the ingress of water.

There is no fitted switch or dimmer within this light fitting.

This light requires 1 bulb(s) of the same type:
1 x LED (Included) Max Bulb Wattage = 1W Bulb Voltage = 240V

This product requires an input voltage of 240V

This light fitting is not suitable for installation onto a dimmer controlled circuit.

This products requires a separately purchased LED Driver. It is possible to buy LED drivers that can handle more than one light fitting, though it can also be easier during installation to buy one per fitting.

Dimensions

Lighting Specification