The Koza interior wall light is made from plaster which gives it an ultra sleek finish. This modern wall light looks great in a bedroom positioned either side of a bed, but works well in any interior. An integral toggle switch at the bottom of the light gives individual control.

This light fitting is designed for bathrooms but can only be used outside all of the bathroom lighting zones 0, 1 and 2. This light must be at least 60cm from the vertical edge of any bath or shower tray and 60cm from any sink tap.

This light fitting has an IEC protection class of 1, single insulated.

This light has an International Protection Rating of IP20. The first digit gives this light protection against contact and ingress of objects >12.5 mm in size. The second digit show that there is no protection of the equipment inside the enclosure against the ingress of water.

This light is fitted with a switch for off and on control. It can also be wired to a wall switch, though if the toggle switch is set to off the wall switch will have no effect.

This light requires 1 bulb(s) of the same type:
1 x E14-SES Golf Ball (NOT included) Max Bulb Wattage = 60W Bulb Voltage = 240V

This product requires an input voltage of 240V.

This light fitting is suitable for installation onto a dimmer control circuit.

Dimensions

Lighting Specification