This light fitting is suitable for use in a bathroom within regulated zone 2 or higher. Zone 2 is the area 60cm away from the edge of the bath or shower tray and 60cm radius from the taps on a sink.

This light fitting has an IEC protection class of 2, double insulated.

This light has an International Protection Rating of IP44. The first digit gives this light protection against contact and ingress of objects >1 mm in size. The second digit shows a protection of the equipment inside the enclosure against ingress of splashing water.

This light is fitted with a pull cord switch for off and on control. This light can also be wired to a wall switch, though if the pull cord is set to off the wall switch will have no effect. If you do not require the pull cord switch you may cut it, however be sure the light works and is switched to on before doing so.

This light requires 2 bulb(s) of the same type:
2 x T5 Tube (Included) Max Bulb Wattage = 13W Bulb Voltage = 240V

This product requires an input voltage of 240V

This light fitting is not suitable for installation onto a dimmer controlled circuit.

Dimensions

Lighting Specification

Astro Lighting	Bathroom Mirror Lights	Bathroom Wall Lights	Bathroom Collection