Taro Aluminium Square Fixed Recessed Downlight

Taro square fixed ceiling downlight in brushed aluminium. A simple recessed ceiling downlight that requires a cut out of 75mm.

The Taro range is also available in brushed aluminium, round or square and either fixed or adjustable designs.

The light given off by this fitting is mainly in a downward direction.

This light fitting is designed for bathrooms but can only be used outside all of the bathroom lighting zones 0, 1 and 2. This light must be at least 60cm from the vertical edge of any bath or shower tray and 60cm from any sink tap.

This light has an International Protection Rating of IP20. The first digit gives this light protection against contact and ingress of objects >12.5 mm in size. The second digit show that there is no protection of the equipment inside the enclosure against the ingress of water.

There is no fitted switch or dimmer within this light fitting.

This light requires 1 bulb(s) of the same type:
1 x GX5.3 Reflector (NOT included) Max Bulb Wattage = 50W Bulb Voltage = 12V

This product requires an input voltage of 12V via a transformer.

This light fitting is suitable for installation onto a dimmer control circuit.

This products requires a transformer to be bought separately to step down the voltage for the bulbs. It is possible to buy a transformer capable to operate more than one of these lights. Dimming products with transformers can result in the dimmer switch or the light itself buzzing. Using a compatible dimmer switch for the type of transformer will reduce this as much as possible.

Lighting Specification

Dimensions

Astro Lighting	Downlights	Ceiling Lights	Spot Lights