Niimi modern LED illuminated bathroom mirror. A polished chrome fitting with a square mirror with 5 x magnification and a fitted switch. Also available with a round mirror.

The light source direction can be adjusted.

This light fitting is suitable for use in a bathroom within regulated zone 2 or higher. Zone 2 is the area 60cm away from the edge of the bath or shower tray and 60cm radius from the taps on a sink.

This light fitting has an IEC protection class of 2, double insulated.

This light has an International Protection Rating of IP44. The first digit gives this light protection against contact and ingress of objects >1 mm in size. The second digit shows a protection of the equipment inside the enclosure against ingress of splashing water.

This light is fitted with a switch for off and on control.

This light requires 4 bulb(s) of the same type:
4 x LED (Included) Max Bulb Wattage = 1W Bulb Voltage = 240V

This product requires an input voltage of 240V

This light fitting is not suitable for installation onto a dimmer controlled circuit.

This product has a built-in LED Driver. LED Drivers are required to step down the input voltage, usually 240V, low enough to operate LEDs which usually operate on about 1.5V.

Dimensions

Lighting Specification